Order toll Free
1-800-470-8932
Checkout
(Shopping cart is empty)

  Park Flyers RC Home > RC Airplanes - Trainer >

  Blue Devil 500 3D RTF RC Plane
Blue Devil 500  RC Plane
Red Devil 500 Class Rc Airplane


 
Red Devil 500 Class Rc Airplane
Our Price: $279.99

Availability:: Usually Ships in 24 Hours
Product Code: 1011
Qty:

Description Technical Specs Action Videos
 



The Blue Devil 3D is a large sized - 500 class brushless powered 3D Aerobatic RC Airplane. Features large wheels that are BIG enough to take off tall grass and rough surfaces at the flying field.

Has enough power to HOVER at 1/2 throttle! Will perform any aerobatic maneuver with ease!

Features a 500 class brushless motor swinging a 12x6 propeller , 4 Channel 2.4 GHZ radio System, and a steerable tail wheel. Made from a durable EPO foam that is both rigid and lightweight.

LED lights are factory installed inside each wingtip that adds to the overall appearance.

A balancing auto peak lipoly A/C CHARGER is included!

Long 20 Minute Run Times!
With the included 2400 mah 11.1 volt - 20c rated Lipoly battery ,the BLUE DEVIL can easily get 20-22 minutes of flight between charges!
That's much LONGER than most RC Nitro powered airplanes!

Advanced Brushless Motor Technology
This is due to the increased efficiency of the included brushless motor. Brushless motors have no internal brushes (friction and heat + energy loss and wear)
and that also means its performance will never degrade over the lifetime of your motor. Same power and torque no matter how many times you use it !!!

Extra Large Landing Gear
Comes with an extra large landing gear that can take off and land in "tall grass fields" with ease.

Large 55 inch wingspan
The Large 55 inch wingspan makes it easy to see, fly and handle more realistic . A larger plane is also less prone getting knocked around in windy conditions.
Features large wheels that allow for take-offs in tall and landings in tall grass. Front nose wheel is servo controlled to allow for sharper turns needed for taxiing on the ground.


EPO FOAM = 10x stronger than regular styrofoam and half the weight of EPP foam.
The BLUE DEVIL 3D is made from very durable EPO Foam. In fact its about ten times stronger than regular styrofoam.

Easy To Fly - The Ultimate RC Airplane Trainer
The BLUE DEVIL is super east to learn how to fly on. Its large main wing has enough wing area to easily dead stick in on landings without stalling. It also allows it to be flown at very low speeds of 10-15 mph. This allows novice to get accustom dot the flight controls. Once mastered you can reach top speed of 60 miles per hours!

Aerobatic - Fun to Fly
The BLUE DEVIL 3D is highly aerobatic, and can easily hover , harrier, inverted flight, rolls, loops, knife edge, stall turns.


In Flight Videos and Video Setup Guides are shown below.





Specifications:
Wingspan: 1400mm/55.1in
Length: 1130mm/44.5in
Propeller: 12×6
Weight (Without battery): 1135g/40 oz
Flying Weight (with battery): 1350g/47.6 oz
Horizonal Static thrust: 1300g/45.9 oz

Configuration:
Radio System: 2.4GHz - 4 Channel Radio
Motor: Brushless Motor - ST3511-KV850
ESC: 40 Amp Brushless
Servo: 9g×2pcs,17g×2pcs
Battery: 2400mAh , 11.1 volt with balancing plug
Charger: Balanced auto peak cut off with variable charge rate.


Red Devil Video Setup Guide from Parkflyers RC on Vimeo.













Accessories for this product...
Devil 500 Class Outrunner Brushless Motor Red Devil 500 Class Spinner Devil 500 Class Wing Connection Rod Red Devil 500 Class Main Wing Set
Our Price: $29.99
Our Price: $4.99
Our Price: $5.99
Our Price: $39.99
Devil 500 Class Outrunner Brushless Motor Red Devil 500 Class Spinner Devil 500 Class Wing Connection Rod Red Devil 500 Class Main Wing Set
Red Devil 500 Class Cowl Red Devil 500 Class Elevator Red Devil 500 Class Rudder
Our Price: $5.99
Our Price: $15.99
Our Price: $13.99
Red Devil 500 Class Cowl Red Devil 500 Class Elevator Red Devil 500 Class Rudder

Share your knowledge of this product with other customers... Be the first to write a review