1.      The Package:

Not much to see here. There's a very plain black box and only a clear window on the top. The bodies are pre-painted lexan, decals/stickers are DIY. Colors available are Blue and Red

2. What's in the Package:

Opening the pack will reveal a complete Ready-to-Run NanoDragon chassis. An excellent 10 model memory digital Transmitter with LCD for setup. The Transmitter is worth a few comment on it's own. Quality is much improved over the earlier design and these now feel much more robust. The configuration and tuning ability of the transmitter is awesome. Two manuals; one for the Transmitter and a smaller one for the chassis Bag of Parts and tools; There rear wing, spare body clip, screws a multi-purpose spanner and screws etc.

3. The Chassis uncovered:

If you've seen a Mini-Inferno you've seen a NanoDragon. The 4-wheel independent suspension has good long arms which and smoothly damped buy large shock units. All arms can be adjusted and also use "ball ends" at most attachment points. Tires are glued to the rims, and have a more road oriented tread.  There's plenty of room for upgrading with 1/10th scale radio gear and the steering servo is a micro-version but still off-the-shelf replaceable. At the rear of the chassis is a battery compartment for 6x AA batteries. We're running 2500mAh NiMH with good results. Again this can be swapped to run an alternative saddle pack. The only thing you have to do before running is install the antenna tube - feeding the generous length antenna wire up it.

4. & 5. Front and Rear Suspension:

Smooth damping, slick movement and long travel really make short work of bumps and lumps.

Battery Compartment

1100 Nihm 7.4 Volt
The Body:
Pre cut and pre-paint Lexan will be durable and if it gets too tatty any Mini Inferno cover can be used.
You get a sticker sheet so that you can choose what decals go where!
The stickers are printed on clear backing and are pre-cut, well finished and very sticky!
Together and Ready to Race
As you can see we didn't use all the provided decals and have added our own as well. Rear wing clips on. The buggy looks great!
Always dispose of Packaging Thoughtfully
The box can keep some amused for hours!

The NanoDragon has bearings right through the driveline with the only plastic bushes being out in the wheel hubs. This means it's a "cheap" 8 bearing set to get the best driveline performance. The Top cad alloy doesn't disappoint, it looks great and has perfect finish.

• Features:
  Chassis:
  Frequency: A.M.
  Digital proportional control
  17g Standard servo (Futaba compatible)
  Ready-to-run with pre-installed electronics and radio equipment
  Long running time: Up to 40mins with 6 AA-sized alkaline batteries
  Maximum speed:35km/h
  Multi-point setting options & parts: Springs; chassis height; front caster; rear toe-in and wing angle adjustment
  Wide range of optional upgrade parts are available
  
  Transmitter:
  F.M. 3-Channel
  Simple segment type LCD display and four edit keys for easy data setup
  10 models memory
  Tow function groups Function Manual/System Manual
  Steering dual rate (D/R-ST)
  Anti-skid Braking System (ABS)
  Digital trim: Steering trim, Throttle trim, Steering D/R
  Function select lever function (FNC-DT1/DT2/DT3/DT4)
  NEW design considers operability and weight balance
  Tension adjustment function
  Input Voltage:12V
  Working Current:160mA
  
  Specifications:
  - Length:270mm
  - Width:173mm
  - Height:100mm
  - Weight:500g (approx. )
  - Wheelbase:176mm
  - Ground Clearance:15-30mm (approx. )
  Tread (F/R):150mm
  - Tire (F/R): DIA.64 x 25mm
  
  Require: 
  8 x AA-sized batteries for transmitter
   
  WEIGHT (g) 1500g