The Red Devil 3D is a large sized - 500 class brushless powered 3D Aerobatic RC Airplane. Features large wheels that are BIG enough to take off tall grass and rough surfaces at the flying field.
Has enough power to
HOVER at 1/2 throttle! Will perform any aerobatic maneuver with ease!
Features a 500 class brushless motor swinging a 12x6 propeller , 4 Channel 2.4 GHZ radio System, and a steerable tail wheel. Made from a durable EPO foam that is both rigid and lightweight.
LED lights are factory installed inside each wingtip that adds to the overall appearance.
The included 2400Mah, 11.1volt lipoly battery will give up to 18 minutes flight time on one charge.
A balancing auto peak lipoly CHARGER is included!
In Flight Videos and Video Setup Guides are shown below.
Specifications: Wingspan: 1400mm/55.1in
Length: 1130mm/44.5in
Propeller: 12×6
Weight (Without battery): 1135g/40 oz
Flying Weight (with battery): 1350g/47.6 oz
Horizonal Static thrust: 1300g/45.9 oz
Configuration:Radio System: 2.4GHz - 4 Channel Radio
Motor: Brushless Motor - ST3511-KV850
ESC: 40 Amp Brushless
Servo: 9g×2pcs，17g×2pcs
Battery: 2400mAh , 11.1 volt with balancing plug
Charger: Balanced auto peak cut off with variable charge rate.
Red Devil Video Setup Guide from Parkflyers RC on Vimeo.
Truly One of The Best 
