The Axial Wraith 1.9 4x4 is a new, 1/10 scale, ready-to-run
platform that delivers it all - technical rock crawling prowess and detailed
scale looks. Take the wheel and take command over mud, rocks, sand, and through
any kind of backyard terrain!
chassis with forward-mounted battery position
Boatsides/skid plate for extra clearance
Chassis-mounted servo for a realistic look
Easy access to electronics, and adjustable battery tray
New body design with LED lights, and grille, radiator, fender, and V8 engine
Spektrum Transmitter and Receiver
Licensed 1.9 Nitto Trail Grappler M/T tires on KMC XD229 Machete crawl wheels
Compact AX10 transmission
AR44 hi-pinion axles for added ground clearance
WB8 HD Wildboar driveshafts
Dual slipper clutch with 32-pitch gearing
foundation the Axial Wraith 1.9 4x4 is the first full tube frame chassis in RC,
providing the durability you need for aggressive action on tough terrain.
Refining the proven 2.2 Wraith chassis design, Axial improved the ground
clearance for this version by reducing the size of its skid plate and lower
rails. Boatsides on the skid plate improve handling by helping the vehicle slip
through and past obstacles.
Your battery mounts at the front of the chassis, for easy access and to provide
the best weight distribution for aggressive climbing. For scale looks, Axial
moved the servo off the top of the axle and onto the chassis - just as a
full-size truck has its steering box located on the frame.
The Wraith 1.9 truck's drivetrain uses a powerful brushed 540 motor to turn its
proven front and rear, single piece AR44 axles. The pinion gear is 6mm above
center, raising the ground clearance and improving driveshaft angles. Axial
boosts the overall strength with metal gear construction; large, flex-reducing
load bearings; increased gear surface contact; and a gear ratio that's
optimized to reduce torque twist.
Adjustable oil-filled, coil over shocks allow you to tune dampening for the
best handling on any track. Molded from durable S30 compound, the officially
licensed Nitto Grappler tires have a large block tread that gets excellent bite
on a wide range of surfaces.
The Wraith 1.9 truck looks ready to climb mountains even when it's standing
still. At the front end of its polycarbonate body you'll find a molded plastic
grille, radiator detail, and two large, LED-equipped headlights. Raise the hood
and you'll see a replica V8 engine tucked in front of the chassis battery
mount. That V8 isn't just for show. It's also a rugged receiver box that guards
the model's Spektrum SRX200 receiver from water, dust, and debris.
The Axial Wraith 1.9 RTR comes factory-assembled and requires only a battery
pack with IC3 connector, compatible battery charger, and four AAs for the
included Spektrum 2.4GHz transmitter. It's easy enough for new RC hobbyists,
with the design sophistication to take experienced drivers on incredible
adventures far beyond the end of the road.
What's in the Box?
Wraith 1.9 1/10 4WD RTR with:
(1) Spektrum SRX200 Receiver (installed)
(1) Tactic TSX45 Metal Gear Servo (installed)
(1) Axial 35T Electric Motor (installed)
(1) Dynamite Electronic Speed Control with Drag Brake (installed)
(1) Spektrum STX2 Transmitter
(1) Product Manual