Parkflyers RC · Lakewood, New Jersey
Kyosho Inferno GT2 VE Race Spec Mercedes-AMG GT3 — 1/8 4WD ReadySet
Kyosho Inferno GT2 VE Race Spec Mercedes-AMG GT3 — 1/8 4WD ReadySet
Kyosho Inferno GT2 VE Race Spec Mercedes-AMG GT3 — 1/8 4WD ReadySet

KYOSHO

KYO34117

Kyosho Inferno GT2 VE Race Spec Mercedes-AMG GT3 — 1/8 4WD ReadySet

$599.99
Parts & UpgradesFind parts by vehicle and model
Hurry, only 2 items left in stock!

Pairs well with

From the Parkflyers RC workbench

Marc's Take

This is the kind of car I would point you toward for big on-road presence: a long-wheelbase GT, a finished AMG body and the brushless system already installed. The appeal is the whole package, including a proper LCD radio and adjustable alignment.

My first upgrade conversation would be about grip. GRP GT TO1 Revo belted tires and GRP GT TO4 slicks give you compound choices for your surface. They are optional and sold in pairs; a full set needs two pairs. Get the tires and alignment right before chasing more motor.

This ReadySet still needs drive batteries, a charger and four transmitter AAs. Talk to us about a matched battery and charger setup so your first order covers what you actually need.

Marc Mamiye · Owner, Parkflyers RC

Inside the Inferno GT2

KYOSHO 34117 · 1/8 ELECTRIC GT READYSET

GT3 presence.
Inferno attitude.

Orange Mercedes-AMG GT3 bodywork. A substantial 1/8-scale footprint. Four-wheel drive and a 2300Kv brushless power system underneath. The Inferno GT2 VE Race Spec brings big-car character to your next on-road session.

Orange Kyosho Inferno GT2 VE Race Spec 2020 Mercedes-AMG GT3, front three-quarter view
1/8Big GT scale
4WDElectric drivetrain
2300KvTORX8+ motor
360mmLong wheelbase

Built for the paved playground.

The GT2’s appeal starts with its proportions: 660mm long and 310mm wide, with a factory-finished 2020 Mercedes-AMG GT3 body and rear wing. Underneath is an accessible chassis layout with side guards, front and rear torque rods, and steel differential gears.

01 / BRUSHLESS POWER

A matched power system

The TORX8+ 2300Kv motor and BRAINZ8 speed control are installed. The system supports up to four LiPo cells total, with a setup switch for adjusting its response.

02 / ROOM TO TUNE

Make the setup yours

Adjustable upper arms and steering tie rods let you refine alignment. The long wheelbase gives this GT its planted proportions, while the open layout makes routine checks easier.

03 / RADIO INCLUDED

More control at your fingertips

The Syncro KT-331P transmitter combines an LCD and jog-dial adjustments with dual rate, ABS and failsafe functions. A metal-geared steering servo is already fitted.

Inferno GT2 VE chassis with installed TORX8+ motor, BRAINZ8 ESC, steering servo and dual battery straps
Under the GT3 body: installed brushless electronics, adjustable suspension and an accessible chassis.

In the box

  • Assembled Inferno GT2 VE chassis with radio system, steering servo and ESC installed
  • Factory-painted Mercedes-AMG GT3 body with decals
  • Installed TORX8+ brushless motor
  • Syncro KT-331P transmitter
  • 1.5, 2.0, 2.5 and 3.0mm hex wrenches, cross wrench and 17mm wheel wrench

Add these before your first run

  • Compatible LiPo batteries: the factory arrangement uses two 2S packs, up to four cells total.
  • A suitable balance charger for your chosen batteries.
  • Four AA batteries for the transmitter.

Battery fit, connector and charging compatibility matter. Ask us to match your packs and charger before ordering.

Browse batteries →   Browse chargers →

The numbers that matter

Model 34117 · Inferno GT2 VE Race Spec
Body 2020 Mercedes-AMG GT3 · Orange
Scale / drive 1/8 · Four-wheel drive
Length × width × height 660 × 310 × 180mm
Wheelbase 360mm
Approximate weight 3,820g
Motor / ESC TORX8+ 2300Kv brushless / BRAINZ8
Gear ratio 9.51:1
Factory tire dimensions 97mm diameter × 48mm width
Transmitter Syncro KT-331P 2.4GHz
Assembly ReadySet: assembled; batteries, charger and transmitter AAs required

NEXT STEP / DIAL IN THE GRIP

Give your GT the right shoes.

For an optional tire upgrade, explore GRP GT TO1 Revo belted tires or GRP GT TO4 slicks. Both listings include Inferno GT/GT2 compatibility. Choose the compound for your surface and conditions; these are sold in pairs, so a complete set needs two pairs. Optional tires are sold separately.

Find parts & plan your upgrades →
Is this a build-it-yourself kit?

No. This is the assembled electric ReadySet. Add compatible drive batteries, a charger and four transmitter AAs, then follow the manual’s setup checks.

Where should I drive it?

Choose a clear paved area appropriate for a low-slung GT car. Rough ground, curbs and obstacles call for a different kind of RC vehicle.

Where are the manual and exploded views?

Kyosho instruction manual (PDF) · Exploded view (PDF) · Parts list (PDF)
© 2026 Parkflyers RC . 
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa