Season’s Greetings! · 1–2 day standard shipping to tri-state

Build details

A Tekno SCT410 2.0 assembled by Parkflyers with sensored Castle power, upgraded steering, a Traxxas TQi radio system and four mounted Pro-Line Gladiator tires.

Base build: $1,559.79. Includes $375 for assembly and electronics installation. The drive battery is optional, and the body is supplied clear unless painting is selected.

Included in your build

  • Castle Copperhead 10 ESC with 1412 3200Kv sensored motor.
  • Powerhobby 760MG steering servo and Traxxas 6509R radio with 6533 TSM receiver.
  • Four Gladiator M3 tires on black Raid wheels.
  • Senton body and wing, Tekno air control guards and the correct TKR9532S steel spur gear.
Illustration of this blue Tekno SCT410 2.0 custom build airborne with spinning wheels and flying dirt, with an Air Control guard detail inset
Action illustration of the finished build. See the actual installed Air Control strips below.
Clear Tekno TKR9584 air control guard installed along the side of this Parkflyers SCT410 2.0 build, identified by the AIR CONTROL lettering
The clear side strip marked AIR CONTROL is fitted to this build. Battery shown is optional.

Included upgrade · TKR9584

Air control guards

These clear side strips help limit air entering beneath the short-course body. The aim is less unwanted body lift, often called parachuting, when air catches under the shell.

  • Airflow management: helps keep unwanted air out from under the body.
  • More predictable handling: designed to support consistent jumps and high-speed stability.
  • A cleaner chassis: owners also report less dirt getting inside.

The effect depends on body ventilation, wind and jump size.

Owner feedback and design notes

SCT410 owners report reduced parachuting and a cleaner chassis; others notice little change or still encounter lift on large, windy jumps. Most published feedback concerns earlier SCT410 versions, rather than the SCT410 2.0. These are reported benefits of the air-guard concept, not measured performance gains for this build.

Read Tekno’s explanation of the earlier SCT410 air-guard design and SCT410 owner feedback. This build uses the SCT410 2.0-specific TKR9584 guards.

Choose your extras

Body painting — one Tamiya PS color +$65.00
Custom stickers +$75.00
Powerhobby 3S 5400mAh 100C hardcase, EC5 +$67.95
Powerhobby 4S 5200mAh 50C LCG hardcase, EC5 +$72.99
Spektrum S155 G2 AC charger — 55W +$74.99
Spektrum S1100 G2 AC charger — 100W +$124.99

Select your options above to see the complete price. Painting covers one color only. A battery and charger are required to run; choose battery and charger add-ons or use your own compatible equipment.

All 13 parts and price breakdown
Part / item number Qty Total
Tekno SCT410 2.0 4WD truck kit
TKR9500
1 $469.99
Castle Copperhead 10 ESC + 1412 3200Kv motor
CSE010-0166-09
1 $239.95
Traxxas TQi radio + 6533 TSM receiver
6509R
1 $100.00
Powerhobby 760MG brushless steering servo
PH760MG
1 $109.95
Pro-Line Gladiator M3 tires on Raid wheels (pair)
PRO116912 · $39.99 per pair
2 $79.98
ARRMA Senton body with standard decals
AR406131
1 $74.99
ARRMA Senton rear wing
ARA406132
1 $13.99
Tekno front and rear body mounts
TKR5791
1 $10.99
Tekno 20T MOD1 pinion, 5mm bore
TKR4180
1 $14.99
Tekno 41T offset steel spur gear
TKR9532S
1 $39.99
IC5 ESC connector
SHMCKJ654454
1 $8.99
Tamiya PS paint material
Default: TAM86016; selected PS color with painting
1 $9.99
Tekno SCT410 2.0 air control guards
TKR9584
1 $10.99
Parts and materials $1,184.79
Assembly and electronics installation $375.00
Base build $1,559.79

Two tire pairs supply four mounted wheels and tires. Paint material is included in the parts total.

Painting and custom stickers

Body painting: +$65, one color only. Choose from the 26 in-stock Tamiya PS colors in the Body painting selector. Your selected paint replaces the default PS-16 Metallic Blue material already included in the package.

Custom stickers: +$75. Adds lettering and graphics similar to the photos. Standard supplied body decals are included with the base build.

The photos show a finished example. Body finish, graphics and the optional Powerhobby EC5 battery follow your selections.

What you need to run
  • A compatible 3S or 4S LiPo battery, selected as an add-on or supplied by you.
  • A suitable LiPo balance charger. Optional Spektrum S155 G2 (55W) and S1100 G2 (100W) AC chargers accept the Powerhobby EC5 packs through their IC5 port. Connect both the main lead and balance lead and select LiPo balance charging.
  • Four AA batteries for the Traxxas TQi transmitter.

Built to order. Contact Parkflyers RC to confirm component availability and assembly timing.

Item PF-SCT41020-CB · Prices before tax and shipping.