Maxx Slash 6s Short Course Truck 1/8th Scale
Maxx Slash 6s Short Course Truck 1/8th Scale
Regular price
$699.95 USD
Regular price
Sale price
$699.95 USD
Unit price
/
per
SKU:102076-4
Maxx Slash 6s Short Course Truck
- VXL-6s™ Waterproof Electronic Speed Control
- 6s LiPo compatible
- Integrated cooling fan
- Real-time telemetry via Traxxas Link™
- 3-LED status indicators
- Powered accessory ports
- 10-gauge silicone wire
- Integrated protection circuits
- Velineon® 2000 kV Brushless Motor
- 4-pole 2000 kV
- 5 mm output shaft
- Finned can for better heat dissipation
- Fixed-Mesh Motor Cradle
- Supports entire motor length
- Reduces flex for longer gear life
- 70+ mph with Optional Gearing and Two 3s LiPo Batteries (sold separately)
- Traxxas Stability Management®
- Improves straight line acceleration and braking on low-traction surfaces
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- TQi™ 2.4 GHz High Output Radio System
- TQi 2-channel transmitter
- Traxxas Link enabled
- 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
- Programmable Multi-Function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- Adjustable steering and throttle end points
- Clipless Body
- Quick and secure installation and removal
- Managed airflow for improved high-speed stability
- Rigid internal frame
- Additional nerf bar side support
- Eliminates body posts and clips
- Molded body reinforcements for tear-through protection
- Drivetrain
- Full-time shaft-driven 4-wheel drive
- Torque-Biasing Center Drive
- Absorbs shocks and distributes power
- Aluminum housing
- Sealed, silicone fluid-filled diffs with large module ring and pinion gears
- Steel pinion and spur gear
- Heavy-duty Cush Drive™
- Steel-Core hybrid telescoping driveshafts
- Splined aluminum center driveshaft
- Modular Low-CG Composite Chassis
- Extended modular chassis design interlocks with front and rear bulkheads
- Absorbs and distributes impact energy
- Molded-in hex reinforcements on flat surfaces
- Easy to service and access components
- Driveline is sealed in the chassis to keep out dirt and grit
- Easy Battery Access
- Large battery compartment with secure snap-lock battery door
- Accepts single 6700 mAh 4-cell LiPo battery or dual 5000 mAh 3s LiPo batteries
- Batteries are protected deep in the chassis
- More secure than conventional retention systems
- Heavy-Duty Steering Bellcranks and Servo
- Large-scale high-output steering servo
- 285 oz-in of torque
- 0.18 sec transit speed
- Triangulated mounting system to fully support case
Heavy-duty double-shear bellcranks
- Suspension
- Heavy duty double-shear suspension arms
- Tough composite formula resists impact damage, even in cold weather
- Engineered to optimize suspension travel and steering angles
- All critical suspension points have double shear strength
Steel pivot balls - C-hub and steering block geometry maximizes steering angle
- Fixed, high-strength camber and toe links
- Steel upper and lower tie bars
- Heavy duty double-shear suspension arms
- GT-Maxx® Shocks
- Machined aluminum threaded body
- Extra-large bore and capacity
- Large-diameter damper shaft
- Lower seal cartridge with dual X-rings
- Adjustable upper spring retainer
- Plastic shock caps with pivot balls
- Lower spring perches bolted on
- Bumpers
- Heavy duty energy absorbing front and rear bumpers
- Lower front and rear skids for impact and abrasion resistance
- Integrated nerf bars for side impact resistance
- Adjustable wheelie bar with integrated carry handle
- Wheels & Tires
- Tough dual-profile wheels with keyed 17 mm hex receptor
- Large 5.3″ Maxx SC belted tires
- Limits tire expansion for game-changing performance
- 1-piece foam inserts
- Pre-glued and ready for action
-
Model Specs
Model Name: Maxx Slash 6s Short Course Truck Model Type: Short Course Trucks Model Speed: 70+ mph with Dual 3s LiPo batteries and optional pinion gear (sold separately) Model Skill Level: 4 Scale: 1/8 Weight: 10.34 pounds (4.69 kg) Length: 26.5 inches (674 mm) Width: 14.3 inches (363 mm) Front Track: 14.3 inches (363 mm) Rear Track: 14.3 inches (363 mm) Height: 9.64 inches (245 mm) Wheelbase: 15.5 inches (394 mm) Center Ground Clearance: 1.54 inches (39 mm) Drivetrain: Shaft-driven 4WD Transmission: Single speed Differential Type: Sealed, hardened steel bevel, limited slip Gear Ratio (Internal): 11.38:1 Gear Pitch: 1.0 metric pitch Servo(s): 2090 digital high-torque waterproof (285 oz-in) Radio System: TQi™ 2.4 GHz transmitter with TSM® receiver Battery Compartment Specs: 181 mm X 56 mm X 45 mm Motor Specs
Motor Name: 4-pole 2000 kV Motor Type: 2000 kV sensorless brushless Motor Weight: 14.32 oz (406 g) Motor Length: 2.97 inches (76 mm) Motor Diameter: 1.65 inches (42 mm) Motor Shaft Size: 5 mm Motor Connector Type: Traxxas 6.5 mm bullet connectors ESC Specs
ESC Name: VXL-6s ESC Type: Brushless ESC Case Size: 2.28” (58 mm) x 2.83” (72 mm) x 1.81” (46 mm) ESC Weight: 7.30 oz (207 g) Motor Connectors: 6.5 mm bullet connectors Battery Connectors: Traxxas High-Current Connectors
Share
Accessories for this product...
-
Maxx Outer Stub Axle Assembly
Regular price $7.00 USDRegular priceUnit price / per -
Unlimited Desert Racer Maxx Slash ESC Battery Jumper (25.2V to 14.8V)
Regular price $6.50 USDRegular priceUnit price / per -
Auto-Detectable Voltage Sensor
Regular price $14.00 USDRegular priceUnit price / per -
Auto-Detectable Temperature Sensor
Regular price $14.00 USDRegular priceUnit price / per -
LOWER SHOCK MOUNT (2)
Regular price $4.00 USDRegular priceUnit price / per -
BODY MAXX SLASH CLEAR HD
Regular price $124.95 USDRegular priceUnit price / per -
High-Intensity Maxx Slash LED Light Kit
Regular price $99.95 USDRegular priceUnit price / per
Upgrades for this product...
-
Mod 1.0 Spur Gear (46T)
Regular price $3.00 USDRegular priceUnit price / per -
Sold out
SPUR GEAR, 50-T STEEL 1.0 MP
Regular price $29.95 USDRegular priceUnit price / perSold out -
SPUR GEAR 44-TOOTH 1.0 MP
Regular price $29.95 USDRegular priceUnit price / per -
LOWER SHOCK MOUNT (2)
Regular price $4.00 USDRegular priceUnit price / per -
32P Hardened Steel Pinion Gear w/5mm Bore (27T)
Regular price $4.00 USDRegular priceUnit price / per
Parkflyers R/C - YouTube Channel
Checkout our youtube Channel for amazing reviews on out products ! We are NOT biased. We tell it like it is.